Filter element: 88FX (Fine filter) SAP-Nr. 4038110 & 88SX (Super fine filter) SAP-Nr. 4038117
The CLEARPOINT filter element is used for the separation of aerosols and solid particles. The very fine borosilicate fibres are the prerequisite for a large cavity volume with a maximum separation surface. This results in very high performances at the lowest differential pressures. The significant performance increase with the CLEARPOINT filters is made possible by pioneering materials: An innovative open synthetic fleece (mesh) on the outside of the filter media ensures the required rigidity for the various filter positions, without thereby reducing the filter surface area. The pioneering production processes by utilising Softpleat technology provide the optimum connection from many surfaces (important for particle deposition) and higher filter bed depths (ensures the deep filtration, especially for oil aerosols).
In accordance with the VDMA recommendation (VDMA 15390), the filter element should be exchanged, depending on the differential pressure, at the latest after 12 months.
Differential-pressure indicator: FDPS
The degree of pollution of the filter elements is indicated by a differential pressure manometer readable on both sides. The scaled announcement makes a direct operating cost analysis possible.
Drain: Manual drain valve
The filter is equipped with a manual drain valve.
• Up to 10–fold increased oil aerosol deposition rates
• Efficient filtration between 30% and 111% for the energy-optimized volume flows
• Extremely reduced differential pressure
• Reductions in energy and operating costs
• Application oriented: Able to fulfill every compressed air filtration requirement with just 3 filtration rates
• Proven filter housing: flow–optimized air supply and fast exchange of filter elements
• High corrosion protection due to high temperature galvanization
| Technical Data | L100FDM | L100SDM |
|---|---|---|
| Maximum flow rate* at 7 bar | flow-optimised: 3160 m³/h energyefficient: 2840 m³/h | flow-optimised: 3160 m³/h energyefficient: 2840 m³/h |
| Compressed-air connection | DN 100 | DN 100 |
| Particle classification | 1 μm | 0.01 μm |
| Removal of solid particles up to | 99.83% 0.5 – 2.0 μm | 99.98% 0.1-0.5 μm |
| Pressure difference (wet-saturated) ** | 85 mbar | 110 mbar |
| Initial pressure difference (dry) | 50 mbar | 60 mbar |
| Oil aerosol deposition rate | 99.50 % | 99.95 % |
| Residual oil aerosol content | up to 0.05 mg/m³ | up to 0.005 mg/m³ |
| Maximum operating pressure | 16 bar | 16 bar |
| Weight | 68 kg | 68 kg |
| Corrosion protection | Carbon steel housing, high temperature galvanized, element seat made of stainless steel, paint finish outside. | Carbon steel housing, high temperature galvanized, element seat made of stainless steel, paint finish outside. |
| manufacturing standards / testing | DGRL 2014/68/EU | DGRL 2014/68/EU |
* related to 20 °C and 1 bar, absolute
** for an energy-optimised volume flow
Reviews
There are no reviews yet.